Troxler 3411-B Manual, Operation And Installation

Model 3411-B Advanced Control Unit 1–5
1. INSTALLATION
This feature requires the input of the access code found on page xi
of this manual. Using the up and down arrow keys to select the
correct number for the flashing digit, enter the access code. To
accept the flashing value and select the next digit, press
〈START/ENTER〉.
The gauge prompts for the input of the E value.
NOTE
If the value is negative, enter a minus sign (–) by
pressing the down arrow key prior to entering the first
digit. Leading zeros must be entered (for example:
0.012345).
To change the value of the flashing digit for the E value, use the up
and down arrows. To accept the flashing value and select the next
digit, press 〈START/ENTER〉.
Enter the remaining constants for each depth.

Troxler 3411-B Specifications

General

Brand	Troxler
Model	3411-B
Category	Control Unit
Language	English