15-SECOND INHIBIT
The 15-Second Inhibit function enables the gauge owner or operator
to disable the 15-second count option. When this function is
enabled, the gauge can only conduct one- or four-minute counts.
To disable the 15-second count option, first access the Special
functions by pressing 〈SPECIAL〉. Use the up or down arrows to
display:
- 15 SECONDS -
To access the 15-Second Inhibit function, press 〈START/ENTER〉.
Enter Code -
0
This feature requires the input of the access code found in the front
of this manual. Using the up and down arrow keys to select the
correct number for the flashing digit, enter the access code. To
accept the flashing value and select the next digit, press
〈START/ENTER〉.
If the 15-second count option is currently enabled, the gauge
displays:
- 15 SECONDS -
Want to DISABLE?
Press 〈ON/YES〉 to disable the 15-second count option. The
gauge returns to the Ready mode.
If the 15-second count option is currently disabled, the gauge
displays:
- 15 SECONDS -
Want to ENABLE?
Press 〈ON/YES〉 to enable the 15-second count option. The
gauge returns to the Ready mode.
4–10
To Next Page
Loading...
Need help?
General