Model 3411-B Advanced Control Unit 3–5
3. ADVANCED OPERATION
Press the down arrow key once to access the Offset function. Press
〈START/ENTER〉 to display:
Offset: Density
(↑ ↓ or ENTER)
To enter a moisture offset, press the down arrow once and press
〈START/ENTER〉.
Moist Offset OFF
Want to enable?
To enable the Moisture Offset function, press 〈ON/YES〉.
K= 0.0
(↑ ↓ or ENTER)
The first digit will flash. To input a minus (–) sign (for a negative
offset), press the down arrow
first! To scroll through the possible
values for each digit, press the arrow key. To select the next digit,
press 〈START/ENTER〉. When all digits are entered, the gauge will
enable the offset. The display will be:
Moist Offset ON
To Next Page
Loading...