.
Insert spray gun holder wireform (A) through hole on
left side of handle(viewing from front of unit). Hold
wireform in place and attach a plastic knob (B) from
inside of unit. Tighten by hand.
Add Engine Oil and Fuel
• Place pressure washer on a levelsurface.
• Refer to engine operator's manual and follow oil and
fuel recommendations and instructions.
6. Insert multi-colored spray tips and other supplied
accessoriesin spacesprovided in accessory tray. See
How to UseAccessory Tray.
Attach Detergent Siphon Hose to Pump
Attach detergent siphon hose (C)to barbed hose fitting (D)
on pump.
NOTICE Anyattempt to crank or start the engine before it
has beenproperly filled with the recommendedoil will
result in equipment failure.
• Referto enginemanualfor oilandfuel fill information.
• Damageto equipmentresultingfromfailuretofollowthis
instructionwill voidwarranty.
NOTE:Checkoil often during engine break-in. Referto
engine operator's manualfor recommendations.
8 www.troybilt.com
To Next Page
Loading...
