To Next PageTo Next PageWhy Troy-Bilt Snow Blower engine fails to start?
If your Troy-Bilt Snow Blower engine won't start, try these steps: move the choke control to the appropriate position, connect the wire to the spark plug, fill the tank with clean, fresh gasoline, prime the engine as instructed in the operator's manual, clean, adjust the gap, or replace the spark plug, and check the fuel line for kinks.
What to do if Troy-Bilt 5024 engine runs erratic?
If your Troy-Bilt Snow Blower engine is running erratically, try filling the tank with clean, fresh gasoline or drain the fuel line.
Why Troy-Bilt 5024 Snow Blower unit fails to discharge snow?
If your Troy-Bilt Snow Blower fails to discharge snow, you should clear the chute assembly or replace the drive belt.
Why Troy-Bilt 5024 Snow Blower unit fails to propel itself?
If your Troy-Bilt Snow Blower is not moving, try to adjust the drive control cable, or replace the drive belt.
General| Engine | 208cc |
|---|---|
| Engine Displacement | 208cc |
| Warranty | 2-Year Limited |
| Clearing Width | 24 inches |
| Speed Settings | 6 Forward / 2 Reverse |
| Throwing Distance | 40 feet |
| Engine Type | 4-Cycle |
Critical warnings, dangers, and proposition 65 notices.
Detailed instructions for safe gasoline use and storage.
Step-by-step guide for starting the snow thrower engine.
Procedures for safely shutting down the engine.
Activating the drive system and augers for snow throwing.
Identification and function of engine start, choke, and throttle controls.
