True ALPINE RUNNER - Page 26

Truetness.com / 800.426.6570 / 636.272.7100
CHAPTER 2: ASSEMBLY GUIDE
26 of 50
OPTIONAL REAR STEP:
Step 3 Attach Step Frame to Unit:
Step 4 Reinstall Step Plastic:
a) Attach the step frame to the unit using
four bolts and two nuts.
Hardware Required:
Included in Step Kit.
a) Reinstall the step plastic using the
screws from steps 1 and 2 as shown.
b) Adjust the leveling feet to ensure the
step is sturdy (if necessary).
Hardware Required:
Screws from steps 1 and 2.
Step 1 Screws
Step 1 Screws
Step 2 Screws