25
STEP 11—ATTACH POWER CORD
220V Power110V Power
OFFOFF ON
ON
00553700
00553600
Power
Inlet
Power
Inlet
Insert the appropriate power cord into corresponding power inlet.
NOTE: In the event the current drawn by the treadmill exceeds a specifi ed value, the circuit breaker portion of the power
ON/OFF switch will operate. The rocker lever will automatically release and position itself to a position half way between
ON and OFF, thus opening the power circuit. If this should occur, please wait 10 minutes and then reset the circuit breaker
by rocking the power switch fully to the OFF position ( ), and then rocking the power switch back to the ON position
( ). If it does not reset, or the circuit breaker operates again under normal use, contact TRUE Product Support at
800.883.8783 or service@truefi tness.com.
To Next Page
Loading...
