True Z8 - Page 105

More Custom Options
SETUP MODE
Z8/Z8m Elliptical Owner’s Guide
105
Default manual : Personal Power-based, or Runner’s Mode, or
Constant Power with 10-watt increments.
Sound: Tones are on (default) or off.
Happy: Adds Happy Mode under Advanced Options key.
CSAFE Enable: Turns on CSAFE network communications.
CSAFE Auto: Elliptical will auto-announce itself to the network
when it powers up.
Def. Weight: Suggested body weight.
Display Options: The number of different data readout sets.
Setting a value of "3" will allow two normal screens and the
ECG waveform display. Setting a value of "5" will allow two
additional screens with more advanced readouts like watts
and running speed equivalents.
SRAM Pause: Enables special retention of workout data even
after console powers off with no external power.
Recommended for residential use only.
Reset: Restore factory default settings.
SETUP MODE
CUSTOMIZABLE
OPTIONS
(CONT.)