7
Maintenance
There are no components inside the iNet Box that re-
quire servicing by the customer.
If it is faulty, replace the complete iNet Box.
Firmware update
An iNet Box firmware update is indicated in the Truma app on
the mobile terminal device. Transmission is via Bluetooth (fol-
low the instructions in the Truma app).
Disposal
The device must be disposed of in accordance with the ad-
ministrative regulations of the respective country in which it is
used. National regulations and laws (in Germany, for example,
the End-of-life Vehicle Regulation) must be observed.
Accessories
External GSM antenna
TIN-bus cable, 3 different lengths
Declaration of conformity
1. Information about the manufacturer
Name: Truma Gerätetechnik GmbH & Co. KG
Address: Wernher-von-Braun-Str. 12, D-85640 Putzbrunn
2. Device identification
Type / model:
GSM control unit / iNet Box
3. Complies with the requirements of the following
ECdirectives
3.1 Electromagnetic compatibility 2004/108/EC
3.2 Radio interference suppression of motor vehicles UN ECE R10
3.3 End-of-life vehicle directive 2000/53/EC
3.4 Low Voltage Directive 2006/95/EC
and bears the CE mark and the type approval number E1
xxxxxxxxxxxxx
4. Basis of the proof of conformity
6. Signatory details
Signature: xxxxx
xxxxxxxx Putzbrunn, 17.11.2014
To Next Page
Loading...
Need help?
General
