TSC MB240 Series User Manual

- 38 -
6.2 Menu Overview
There are 6 categories for the menu. You can easy to set the settings of the printer without
connecting the computer. Please refer to following sections for more details.
This “Setting” category can set up the printer
settings for TSPL & ZPL2.
This "Sensor"option is used to calibrate the
selected media sensor. We recommend
calibrate the sensor before printing when
changing the media.
This "Interface" option is used to set the
printer interface settings.
This "Advanced" option is used to set the
printer LCD settings, initialization, cutter
type, media low warning setting %...etc.
This "File Manager" option is used to check/
manager the printer available memory.
This "Diagnostic" optin is used to review
printer to troubleshoot problems and other
issues.

TSC MB240 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Resolution	203 dpi
Processor	32-bit RISC CPU
Operating Humidity	25-85% non-condensing
Connectivity	USB 2.0, RS-232
Media Sensor	Reflective, Transmissive
Media Type	Continuous, Die-cut, Black mark, Fan-fold, Notched
Media Width	25.4 mm
Media Thickness	0.06 mm
Media Core Diameter	25.4 mm (1")
Media Max Roll Diameter	127 mm (5")
Ribbon Width	110 mm
Ribbon Length	300 m
Ribbon Core Diameter	25.4 mm (1 inch)
Power	100 - 240 VAC, 50/60 Hz
Maximum Print Length	9999 mm
Label Width	25.4 mm
Label Thickness	0.06 mm
Power Supply	100-240V AC, 50-60Hz
Operating Temperature	5°C - 40°C
Storage Temperature	-20°C - 60°C
Certifications	CE