TSC MH241 Series Manual

12
Update History
Date
Content
Editor
2021/6/4
Correct the number order for the Option part ( 12,13)
Linda
2021/6/4
Modiy the image of Rewinder module on Option Chapt.
Linda
2021/7/2
Add SP-MH241-0053, MH241 HEAVY DUTY CUTTER BLADE MODULE (SPARE
PART) to the part list
Linda
2021/9/2
Modify:
SP-MH241-0026,203 DPI TPH ASSY to PH-MH241-0001 , 203 DPI TPH ASSY
SP-MH241-0027,300 DPI TPH ASSY to PH-MH241-0002, 300 DPI TPH ASSY
SP-MH241-0028,600 DPI TPH ASSY to PH-MH241-0003, 600 DPI TPH ASSY
Linda
2021/9/13
Add SP-MH241-0053,HEAVY DUTY CUTTER (GUILLOTINE)
BLADE MODULE, MH241
Add SP-MH241-0055, LABEL ROLL GUARD, MH241
Linda
2021/10/13
Modify the picture on Right Side Assemblies Chapter
Linda
2022/2/8
Add:
PH-MH241-0004, PRNTHD ASSY, MH241 (ALTERNATIVE)
PH-MH241-0005, PRNTHD ASSY, MH341 (ALTERNATIVE)
PH-MH241-0006, PRNTHD ASSY, MH641 (ALTERNATIVE)
PH-MH241-0004, PRNTHD ASSY, MH241 (ALTERNATIVE)
Linda
2024/1/24
Modify the description for SP-MH241-0005
Modify the the LABEL ROLL GUARD, MH241 P/N to SP-MH241-0056
Camille
2024/2/22
Modify the description for TPHs
Remove the ALTERNATIVE TPHs
Add PRINT HEAD HARNESS CABLE P/N
Remove the SP-MH241-0053 (HEAVY DUTY CUTTER BLADE MODULE)
Modify the description for OP-MH241-0005
Camille

TSC MH241 Series Specifications

General

Resolution	203 dpi
Max. Print Width	104 mm
Interface	Ethernet
Scanning Method	Thermal Transfer/Direct Thermal
Supported Barcode Types	1D Barcodes
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5°C to 40°C
Storage Temperature	60°C
Humidity	25-85% non-condensing
Weight	MH241/MH241T/MH241P: 15 kg MH341/MH341T/MH341P: 15 kg MH641/MH641T/MH641P: 15 kg