TSC MH261T Series User Manual

- 26 -
6. Adjust the front label guide to fit the width of the label. Making sure the label is into both label
guides.
7. Close the print head mechanism by pushing down on both right and left sides of the deck. Make
sure the latches are engaged securely.
8. Using the front display panel ( ), calibrate the media sensor.
Note:
* Please calibrate the gap/black mark sensor when changing media.
* Please refer to video on TSC YouTube or driver CD.
Loading path for media & ribbon

TSC MH261T Series Specifications

General

Brand	TSC
Model	MH261T Series
Category	Barcode Reader
Language	English