TSC MH261T Series User Manual

- 37 -
Print Speed
Use this item to set print speed. The each increase or
decrease is 1 ips.
203dpi: 6
300dpi: 4
Slew Speed
Use this item to set feed speed. The each increase or
decrease is 1 ips.
203dpi: 6
300dpi: 4
BackFeed Speed
Use this item to set back feed speed. The each increase or
decrease is 1 ips.
2
Tear Off
This item is used to fine tune media stop location. Available
setting value is from “+” to “-” or “0” to “9”.
0 dot
Print Mode
This item is used to set the print mode. There are 3 modes as
below,
Printer Mode
Description
Tear Off
Next label top of form is aligned to the print
head burn line location.
Peel Off
Enable the label peel off mode.
Rewind
Enable the label rewind mode
Applicator
The printer prints a label when it receives a
signal from the applicator.
Cutter
Enable the label cutter mode
Tear Off
Print Width
This item is used to set print width. The available value is from
“0” to “9”.
1800 dot
List Fonts
This feature is used to print current printer available fonts list
to the label. The fonts stored in the printer’s DRAM, Flash or
optional memory card.
N/A
List Images
This feature is used to print current printer available images
list to the label. The images stored in the printer’s DRAM,
Flash or optional memory card.
N/A
List Formats
This feature is used to print current printer available formats
list to the label. The formats stored in the printer’s DRAM,
Flash or optional memory card.
N/A
List Setup
This feature is used to print current printer configuration to the
label.
N/A
Control Prefix
This feature is used to set control prefix character.
7E(~)
Format Prefix
This feature is used to set format prefix character.
5E(^)
Delimiter Char
This feature is used to set delimiter character.
2C(,)
Media Power Up
This option is used to set the action of the media when you
turn on the printer.
Selections
Description
Feed
Printer will advance one label
Calibration
Printer will calibration the sensor levels,
determine length and feed label
Length
Printer determine length and feed label
No Motion
Printer will not move media
No
Motion

TSC MH261T Series Specifications

General

Brand	TSC
Model	MH261T Series
Category	Barcode Reader
Language	English