How to remove gray line on the blank label of TSC MH641T Printer?
If your TSC Printer shows a gray line on the blank label, try to resolve it by: * Cleaning the print head. * Cleaning the platen roller.
What to do if my TSC Printer displays 'Carriage Open'?
To address a 'Carriage Open' error on your TSC Printer, close the print carriage.
How to fix label skew on a TSC MH641T?
If the label feeding is not stable (skewed) when printing with your TSC Printer: * If the label is moving to the right, move the label guide to the left. * If the label is moving to the left, move the label guide to the right.
How to troubleshoot a TSC MH641T Printer when the power indicator is off?
If your TSC Printer's power indicator is not illuminating, please check the following: * Ensure the power cord is properly plugged into both the printer and the outlet. * Make sure the printer is switched on.
Why is my TSC MH641T skipping labels when printing?
If your TSC Printer is skipping labels when printing, take these steps: * Check if the label size is set up correctly. * Calibrate the sensor using Auto Gap or Manual Gap options. * Clear the GAP/Black mark sensor with a blower.
How to fix a paper jam on a TSC MH641T?
If your TSC Printer shows a 'Paper Jam' error, try the following: 1. Calibrate the media sensor. 2. Set the correct media size. 3. Remove any stuck labels from inside the printer mechanism.
Why is my TSC MH641T not printing anything on the label?
If your TSC Printer is not printing on the label, follow these steps: * Load the media and ribbon according to the instructions. * Verify the ribbon is properly installed with the inked side facing the correct direction. * Calibrate the gap/black mark sensor.
How to improve print quality on a TSC MH641T Printer?
If you are experiencing poor print quality with your TSC Printer, consider the following: * Reload the supply. * Clean the print head and platen roller. * Adjust the print density and print speed. * Run a printer self-test and check the print head test pattern for missing dots. * Change to a proper ribbon or label media. * Adjust the printhead pressure adjustment knob. * Ensure the release lever latches the printhead properly.
General| Print Technology | Thermal Transfer/Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Connectivity | USB, Ethernet |
| Operating System Compatibility | Windows, Linux |
| Print Length | 1000 mm |
| Media Thickness | 0.06 ~ 0.19 mm (2.36 ~ 7.48 mil) |
| Media Core Diameter | 25.4 ~ 76.2 mm (1" ~ 3") |
| Label Length | 1000 mm |
| Ribbon Core Diameter | 25.4 mm (1") |
| Processor | 32-bit RISC |
| Ribbon Length | 984.25" (25, 000 mm) |
Detailed technical specifications and features of the MH241, MH341, MH641, MH241T, MH341T, MH641T, MH241P, MH341P, MH641P printer models.
Step-by-step instructions for physically setting up the printer, including placement and connections.
Procedures for loading and removing ribbons, and loading various types of media into the printer.
How to adjust print head pressure, position, and ribbon tension for optimal print quality.
Fine-tuning printer mechanisms to prevent ribbon wrinkles, addressing common causes and solutions.
To Next Page
