TSC PRINTRONIX TDP-247 Series - Loading Label in Peel-Off Mode (Option)

11
3.5 Loading Label in Peel-Off Mode (Option)
1. Open the peel-off module by pulling it out.
2. Thread the label, printing side facing up, through the
label guides and place it on top of the platen.
3. Thread the label through the liner opening, which is
beneath the roller.
4. Adjust the black center-biased label guides by
turning adjustment knob to fit the edge of the label
backing.
5. Push the peel-off panel back to the printer.
6. Close the top cover