EasyManuals Logo

TSC TE300 series User Manual

TSC TE300 series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
10
3. Setup
3.1 Setting up the Printer
Place the printer on a flat, secure surface, then
follow the steps below:
1. Plug the power cord into the AC power cord
socket at the rear of the printer. Then, plug
the other side into a properly grounded
power outlet.
2. Connect the printer to the computer with the
provided USB cable.
3. Push the power switch on “-” side to open the
power of printer.
4. If you would like to watch printer installation
videos, please scan the QR code on the right
side for more information.
Note:
* Please switch OFF printer power switch prior to plugging in the power cord to printer power jack.
* The interface picture here is for reference only. Please refer to the product specification for the interfaces
availability.

Other manuals for TSC TE300 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TSC TE300 series and is the answer not in the manual?

TSC TE300 series Specifications

General IconGeneral
BrandTSC
ModelTE300 series
CategoryBarcode Reader
LanguageEnglish

Related product manuals