To Next Page

To Previous Page

 SET PEEL

Description

This setting is used to enable/disable the self-peeling function. The default setting for this

function is off. When this function is set on, the printer stops after each label printing, and

does not print the next label until the peeled label is taken away. This setting will be saved in

printer memory when turning off the power.

Syntax

SET PEEL ON/OFF

Parameter Description

ON Enable the self-peeling function

OFF Disable the self-peeing function

Example

REM ***SELF-PEELING FUNCTION ON***

SIZE 4,4

GAP 0,0

DENSITY 8

SPEED 6

DIRECTION 0

REFERENCE 0,0

SET CUTTER OFF

SET PEEL ON

CLS

TEXT 50,100,"3",0,1,1,"SELF-PEELING FUNCTION TEST"

PRINT 5

Questions and Answers:

Need help?

Do you have a question about the TSC TTP-343C series and is the answer not in the manual?

TSC TTP-343C series Specifications

General