TSC AUTO ID Technology Co., Ltd. 81 Copyright 2009 All Rights Reserved.
Message Translation Protocols
~#
Description
The beginning identifier (~#) of the prompt message is sent from the printer to the KP-200
portable keyboard. The ending identifier is ~&.
@0 following the ending identifier ~& is used to instruct keyboard to display the prompt in
the first line of LCD display.
@1 following the ending identifier ~& is used to instruct keyboard to display the prompt in
the first line of LCD display.
If @0 or @1 are not present, prompt string will be displayed in first line of LCD and input
data will be displayed in second line of LCD.
Syntax
~#Prompt~&[@0]
~#Prompt~&[@1]
Parameter Description
None N/A
Example
DOWNLOAD "A.BAS"
OUT "~#KP-200~&@0"
OUT "~#Testing~&@1"
EOP
A
See Also
INPUT, OUT
To Next Page
Loading...