To Next Page

To Previous Page

 REVERSE

Description

This command reverses a region in image buffer.

Syntax

REVERSE X_start, Y_start, X_width, Y_height

Parameter Description

X_start The x-coordinate of the starting point (in dots)

Y_start The y-coordinate of the starting point (in dots)

X_width X-axis region width (in dots)

Y_height Y-axis region height (in dots)

Note: 200 DPI: 1 mm = 8 dots

300 DPI: 1 mm = 12 dots

Recommended max. height of reversed black area is 12mm at 4” width. Height of

reversed area that is larger than 12 mm may damage the power supply and affect the

print quality.

Max. print ratio is different for each printer model. Desktop and industrial printer

print ratio is limited to 20% and 30% respectively.

Example

SIZE 4,2.5

GAP 0,0

SPEED 6

DENSITY 8

DIRECTION 0

CLS

TEXT 100,100,"3",0,1,1,"REVERSE"

REVERSE 90,90,128,40

PRINT 1,1

Questions and Answers:

Need help?

Do you have a question about the TSC TTP-343C series and is the answer not in the manual?

TSC TTP-343C series Specifications

General