TSC AUTO ID Technology Co., Ltd. 167 Copyright 2009 All Rights Reserved.
PEEL
Description
This command obtains the status of the peel-off sensor. This attribute is read only.
Syntax
PEEL
Return Value Description
0 Paper is not on top of peel sensor
1 Paper is on top of peel sensor
Example
DOWNLOAD "DEMO.BAS"
SIZE 4,1
GAP 0,0
SPEED 4
DENSITY 8
SET PEEL OFF
SET KEY1 OFF
SET LED1 OFF
SET LED3 OFF
:START
LED1=0
LED3=0
IF KEY1=1 THEN GOTO A
GOTO START
:A
LED1=1
CLS
TEXT 10,10,"3",0,1,1,"PEEL Function Test!! "
PRINT 1,1
:B
LED1=0
IF PEEL=1 THEN
LED3=1
GOTO B
ELSE
CLS
TEXT 10,10,"3",0,1,1,"The label is removed from the PEEL sensor!!"
PRINT 1,1
GOTO START
ENDIF
EOP
DEMO
To Next Page
Loading...