TSC AUTO ID Technology Co., Ltd. IV Copyright 2009 All Rights Reserved.
Document Conventions
This manual uses the following typographic conventions.
Convention Description
[expression list] Items inside square brackets are optional, expression
maximum length 2*1024 bytes;
<ESC> ESCAPE (ASCII 27), control code of status
polling command returns the printer status
immediately.
~ (ASCII 126), control code of status polling
command, returns the printer status only when
the printer is ready.
Space (ASCII 32) characters will be ignored in the
command line.
“ (ASCII 34), beginning and ending of expression
CR,LF (ASCII 13),(ASCII 10) denotes end of command line.
NULL (ASCII 0) supported in the expression, except the
2D bar code commands.
Note: 203 DPI: 1 mm = 8 dots Arial font in bold and italic type is used for note.
To Next Page
Loading...