TSI Instruments 3076 User Manual

6-1
CHAPTER 6
Atomizer Maintenance
and Service
Use the information in this chapter to maintain the Model 3076
Constant Output Atomizer and to contact TSI Incorporated for
service.
Maintaining the Atomizer
The Atomizer needs virtually no maintenance. However, it should
be kept clean and free of rust. Even though most of the Atomizer
parts are made of stainless steel, solutes such as sodium chloride
will eventually corrode them. Therefore, TSI recommends that the
Atomizer assembly be disassembled, cleaned, dried, and
reassembled after such materials are used. Figure 6-1 shows the
various parts of the Atomizer assembly.
Note: When taking the Atomizer apart, be careful not to damage the
delicate platinum nozzle plate.

TSI Instruments 3076 Specifications

General

Brand	TSI Instruments
Model	3076
Category	Electronic Cigarettes
Language	English