5-28 Electrostatic Classifier Model 3082 and SMPS Spectrometer Model 3938
Date and Time
To set the date and time, follow these instructions:
1. In the Date: field, to specify a Date, either press the drop-down arrow
(▼) and select a date from the resulting on-screen calendar, or touch
the numbers in the field and then select a date from the on-screen
keypad.
Figure 5-14
Electrostatic Classifier Date and Time Screens
2. In the Time: field, to specify a Time, use the arrows (◄►) to select a
time or touch the numbers in the field then select a time from the on-
screen keypad.
3. Touch the 24 Hour box to specify a 24-hour date format.
4. To choose the Date Format (MM/DD/YYYY, DD/MM/YYYY,
YYYY/DD/MM, or YYYY/MM/DD) press the arrows (▲▼) to toggle
between the options.
5. Touch OK to send the values to the system or Cancel to cancel the
values.
To Next Page
Loading...
