Instrument Operation 5-53
Shutting O ff the E l e c t rosta t i c C lassifier
To shut off the Electrostatic Classifier, follow these instructions:
1. Press the power button on the front panel.
2. In the resulting dialog box, select Yes.
C a u t i o n
Although there is a rocker switch on the back of the instrument, it is
recommended that the front panel power button be used to safely shut
down the classifier to avoid the possibility for a loss of data.
Note: It is not necessary to turn off the instrument using the rocker
switch on the back of the instrument in addition to shutting off
the classifier from the front panel.
To Next Page
Loading...
