EasyManuals Logo
Home>TSI Instruments>Laboratory Equipment>SMPS 3938

TSI Instruments SMPS 3938 User Manual

TSI Instruments SMPS 3938
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
4-1
C H A P T E R 4
I n s t r u m e n t D e s c r i p t i o n
Use the information in this chapter to become familiar with the location and
function of controls, indicators, and connectors on the Model 3082
Electrostatic Classifier.
W A R N I N G
The charger, DMA, and high voltage transducer board all have un-
insulated voltage. Un-insulated voltage within the instrument may have
sufficient magnitude to cause electric shock. It is dangerous to make
any contact with any part inside the instrument.
W A R N I N G
Unsafe use of this instrument can occur if it not used in a manner
described within this manual. Failure to follow all of the procedures
described in this manual can result in serious injury to you or cause
irrevocable damage to the instrument.
W A R N I N G
The Model 3077/3077A Neutralizer contains radioactive material that is
subject to the regulations of the U.S. Nuclear Regulatory Commission
as well as local regulations. The Model 3088 Advanced Aerosol
Neutralizer contains an x-ray source, which may be subject to local
regulations. During normal operation, you will not be exposed to x-ray
radiation. Do not make any changes, such as detaching the x-ray
source from the neutralizer tube, to the Aerosol Neutralizer.

Table of Contents

Other manuals for TSI Instruments SMPS 3938

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TSI Instruments SMPS 3938 and is the answer not in the manual?

TSI Instruments SMPS 3938 Specifications

General IconGeneral
BrandTSI Instruments
ModelSMPS 3938
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals