TSi Power Corporation MC80043,4,5,6,7,8,9,50
ATS-800 Series Automatic Transfer Switches Rev. 3, April, 2018
TSi Power Corporation Proprietary Information 30
6.18 MC80050 ATS-800 SERIES HARDWIRE, 230 V, MODELS 800-3911 AND -5911
TSi Power’s ongoing product improvement process makes specifications subject to change. Other companies product
names herein are for identification purposes only and may be trademarks of their respective companies.
SPECIFICATION
ATS-800-3911 ATS-800-5911
ELECTRICAL
VA at 230 V 3450 4600
Circuit breaker
15 A 20 A
Switching technology Mechanical relays
INPUT
Voltage / Current 230 V / 15 A 230 V / 20 A
Frequency range 47 to 63 Hz, Caution: Both sources must use same nominal frequency
Transfer time Typically ½ cycle (~8 ms for 60 Hz or ~9.7 ms for 50 Hz)
AC input connections Hardwire terminals
(standard Hardwired units must be installed by a qualified electrician)
OUTPUT
Voltage / Current 230 V / 15 A 230 V / 20 A
Load regulation 1 % from no load to full load
Power efficiency 99 % or higher
AC distribution IEC 60320 C - 13 IEC 60320 C - 19
LED indicators: Green: Primary output, Yellow: Backup output, Red: No primary or backup AC
Audible alarm Buzzer beeps when loss of primary or backup AC occurs
Audible alarm on / off Enable / Disable switch
Alarm contacts Rear-mounted DB-9 connector sends loss of primary / backup AC
PHYSICAL
Dimensions: mm / inches W: 422 mm / 16.63" H: 43 mm / 1.7" D: 267 mm / 10.5"
Weight: kg / lbs 8 lbs / 3.63 kg
Integral 19" Front Rack-Mount Standard
ENVIRONMENTAL
Ambient temperature 0° to 40° C / 32° to 104° F
AGENCY APPROVALS
Safety EN 60950-1
EMC Radiated: EN55022-1 Immunity: EN55024
WARRANTY
Warranty Two year limited warranty covers parts and labor
To Next Page
Loading...
