TSi Power ATS-800 Series - Construction; Rear Access

TSi Power Corporation MC80043,4,5,6,7,8,9,50
ATS-800 Series Automatic Transfer Switches Rev. 3, April, 2018
TSi Power Corporation Proprietary Information 8
1.5 CONSTRUCTION
The ATS-800 enclosure is constructed of 18 gauge (.048 in. thick), galvaneal steel, as
standard, and finished with a liquid black polyester powder coating for long-lasting durability.
The cover is easily removeable for servicing.
1.6 REAR ACCESS – See Figures 4, 5, 6, 7 AND 8
The DB-9 Connector, Primary and Backup circuit breakers, Hardwire Termination
compartments and Plugs and Receptacles are accessed from the rear of the ATS Series
enclosures.
1.61 TOP-DOWN VIEW OF COVER SHOWING MAIN IDENTIFICATION LABEL AND
REAR COMPONENT LOCATIONS (for ATS-800-4000 hardwire unit) – See Figure 4.
Figure 4: ATS-800-4000 Hardwire top-cover label showing rear
compartments/components
DB-9 Alarm
Interface
AC Output
Location
Backup
Input
Location
Primary
Input
Location
Backup
Input
Breaker
Primary
Input
Breaker