TSi Power Corporation MC80043,4,5,6,7,8,9,50
ATS-800 Series Automatic Transfer Switches Rev. 3, April, 2018
TSi Power Corporation Proprietary Information 12
2. MAJOR COMPONENT/CIRCUIT DESCRIPTIONS
2.1 ATS SYSTEM ARCHITECTURE (See Figure 9)
Figure 9: ATS-800 System Architecture
2.2 ATS SERIES CIRCUIT BOARDS
2.21 Main Control Circuit Board Assemblies (See Figures 10 and 11)
Two main control circuit boards are used in the ATS Series. The PZ00120-5 is used in the 2000,
3000, 4000, 5000, 6000 and 7000 models, while the PZ00127-5 is used in the models 8000 and
9000. The circuit board assemblies are mounted to the chassis by means of four (4) snap-on
standoffs and one M3x0.5 Screw, see Figures 8, 10 and 11.
To Next Page
Loading...