TSi Power ATS-800 Series - Safety Alerts; General ATS Series Description

TSi Power Corporation MC80043,4,5,6,7,8,9,50
ATS-800 Series Automatic Transfer Switches Rev. 3, April, 2018
TSi Power Corporation Proprietary Information 6
1.2 SAFETY ALERTS
SAFETY SIGNAL WORD DEFINITIONS
This document contains safety alert pictorial Symbols and Words that point out areas and
procedures that require special attention with regards to safety. These Symbols and Words are
defined in ANSI Z535.4-1998, Product Safety Signs and Labels.
DANGER:
DANGER indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING:
WARNING indicates a potentially hazardous situation which, if not avoided, will result in
death or serious injury.
CAUTION:
CAUTION indicates an imminently hazardous situation which, if not avoided, may result
in minor or moderate injury. It may also be used to alert against unsafe practices.
The safety alert pictorial symbol appears in this document to make users aware of important
operating and safety concerns.
NOTE : Specific models of the ATS Series may be ETL Listed to signify
conformance with UL, CSA or CE requirements. For actual Listings see
individual model specifications in Section 6.1. Users should install the ATS
only where permitted and carefully follow the instructions in this manual.
WARNING:
The ATS-800 receives power from two AC sources. To prevent any hazardous situations
from occurring, always turn off both circuit breakers in the rear of the ATS unit (see Fig.
4 and 5), as well as the upstream circuit breakers protecting both AC input sources to the
ATS unit before connecting or disconnecting the AC input and output wires to the input
and output terminal blocks or connecting the plug cables from the rear of the ATS unit.
1.3 GENERAL ATS SERIES DESCRIPTION
• Accepts inputs from asynchronous sources and can be used with most supply
voltages, including out-of-phase.
• ~8 to ~9.7 millisecond (ms) transfer time between sources is fast enough for even
the most sensitive loads.
• Audible alarm with enable / disable switch provides for unattended security.