TSi Power Corporation MC80043,4,5,6,7,8,9,50
ATS-800 Series Automatic Transfer Switches Rev. 3, April, 2018
TSi Power Corporation Proprietary Information 7
•
LED status indicators for quick visual displays of fault conditions.
•
Higher than 99% efficiency means substantial energy savings (when the ATS is
used as a battery-less UPS).
•
Remote monitoring is provided through a DB9 port.
•
70-90% reduction in both CAP-EX and OP-EX (when the ATS is used as a battery-
less UPS).
•
Built-in primary and backup rocker style circuit breakers are highly visible and easily
accessible on rear of unit.
•
The ATS allows redundant AC power to mission-critical equipment using any
combination of UPS, backup generator or other available autonomous AC power
sources.
•
Sturdy steel enclosure can be front rack mounted to 19" racks by means of integral
rack mount ears. For other mounting options consult your local TSi sales associate.
• AC Inputs are galvanically isolated.
1.4 OVERALL DIMENSIONS
The ATS-800 enclosure dimensions are 16.63" (422 mm) wide x 1.7" (43 mm) high x 9"
(229mm) deep for Plugs and Receptacles units and 10.5" (267 mm) deep for Hardwire units
– see Fig. 3.
Figure 3: ATS-800 Dimensions for Hardwire Units Shown (black polyester coating shown)
To Next Page
Loading...
