TSi Power ATS-800 Series - Component Locations

TSi Power Corporation MC80043,4,5,6,7,8,9,50
ATS-800 Series Automatic Transfer Switches Rev. 3, April, 2018
TSi Power Corporation Proprietary Information 10
DB9
Connector
Backup
Input
Backup Input
Breaker
Primary Input
Breaker
Primary
Input
AC
Output
1.64 REAR VIEW OF MC80045 UNIT WITH IEC PLUG AND RECEPTACLES (See Figure 7)
Figure 7: Rear View of ATS-800-3904 Plugs and Receptacles unit showing DB9
connector, Primary and Backup circuit breakers, two IEC60320 C14 Input
Plugs and four IEC60320 C13 AC Output Receptacles
1.7 COMPONENT LOCATIONS
1.71 TOP VIEW WITH COVER REMOVED (See Figure 8)
Removing the top cover exposes the main wiring and major components of the ATS Series.
Before removing the top cover, make sure that both input circuit breakers are in the “OFF”
position and that the up-stream Primary and Backup AC sources are de-energized (switched
OFF).
DANGER: If the unit has already been installed and prior to the removal of the top
cover, make sure that both the PRIMARY and BACKUP INPUT CONNECTORS in the
back of the unit have been have been disconnected and that the up-stream Primary and
Backup AC sources are de-energized (switched OFF) - (See Figure 8).