Getting Started 2-5
TSI Detection Management Software
TSI Detection Management Software (DMS) is a software application
designed by TSI that runs under the Windows
®
operating system. You
can use DMS for a variety of functions related to the Edge dosimeter and
with many other TSI/Quest instruments. DMS has the ability to customize
your set-up parameters, display data, manipulate data, and create
reports.
Loading
To load DMS, follow the screen prompts.
The software will automatically load the drivers for the EdgeDock1 and/or
EdgeDock5. If loading from the TSI Detection Internet site, follow the
directions online located at www.tsi.com.
Docking Station Functionality
Depending on the kit you purchased, you may have an EdgeDock1
and/or an EdgeDock5. Both are designed similarly with the same LED
indicators. The main difference with the EdgeDock5 is that it has five
bays for docking, charging, and/or managing the dosimeters. If desired,
the EdgeDock5 will charge all docked instruments at one time.
The docking station serves a dual-purpose role:
1. It is used to charge the battery on the dosimeter(s).
2. It is used to communicate between the software (DMS) and the
dosimeter (i.e., import, export settings and measurement files).
Power connector
USB connector
Figure 2-5
EdgeDock1
To Next Page
Loading...
Need help?
General
