4-6 The Edge Personal Noise Dosimeter Model EG-4P User Manual
Setting Contrast on Dosimeter
Contrast
1. Ensure the meter is Off.
2. Turn the meter on by pressing the on/off/enter button.
3. When the splash screen appears, press and hold the run/stop
and on/off enter
buttons (see Figure 4-5 for splash screen).
4. The Setup menu appears on the Edge. Repeatedly press the arrow
key until the Contrast symbol is selected.
Setup menu is used to reset the dosimeter, change the contrast, and
return to the main view.
Arrows and enter
key Indicates the
valid keys are
selected
Checkmark icon
Is the selection to exit
the setup menu
Figure 4-7
Changing the Contrast from the Keypad
5. Next press the on/off enter button.
6. A number will appear on your display (i.e., 50). Press the up or
down arrow to increase or decrease the contrast of the Edge.
7. Press on/off enter button to accept the new contrast value.
8. To return to the measurement view screen, press the down arrow
and press the on/off/enter button.
To Next Page
Loading...
Need help?
General
