AMU2-8HD+/3G 4 Issue 1
Contents
1.0 Introduction
2.0 Front Panel Controls
2.1 Input and Meter Selection Buttons
2.2 Output Switching and monitoring
3.0 Pin-out Details
3.1 Line output
3.2 Analogue Output Connector – D25 Socket Pinout
3.3 AES Input/Output connector – D25 Socket Pinout
3.4 Control Connector - D9 Socket
3.5 External Connector - D15 Plug
3.6 S/HD BNC connectors
3.7 Re clocked BNC connector
3.8 Down converted BNC connector
3.9 Remote Control Connector/ RS 422 - D9 Socket
3.10 Aux (Dolby Metadata) - D9 Socket
4.0 LS Output
5.0 Configuration Switch Functions
6.0 General Notes
7.0 Specification
8.0 Block schematic diagram
9.0 Front and Rear panel layout drawings.
To Next Page
Loading...