10. OPERATING INSTRUCTIONS OF THE TSPROF K03 PRO SHARPENING DEVICE
◇ The machine has protective marks and the warranty will not apply if they are damaged.
◇ Use liquid oils (household, industrial) to lubricate the moving mating surfaces of the Device.
◇ Before using the Вevice, check that it is in good working order. In case of a malfunction, please contact the
Manufacturer for all repairs.
◇ Movement of the holder with the abrasive bar during sharpening should be consistent, smooth, without sudden
movements and excessive pressure on the holder of the abrasive bar.
11. CLEANING AND MAINTENANCE
After completing your work, remove dirt from the Device and thoroughly clean all surfaces. Wipe surfaces prone to
corrosion with a cloth lightly dampened with household oil.
12. STORAGE AND TRANSPORTATION
Store the device in its original packaging or in a dust-free place at a temperature between +5° C and +40° C. Store in a
dark, dry place at room temperature. In humid climates, put some moisture regulator bags in the box with the Device, and
lubricate with technical oil where corrosion may occur.
It is allowed to transport the device by all means of transport at temperatures from -40 °С to +50 °С. If the device is
transported at subzero temperatures, it can be used only after staying for at least 3 hours at room temperature.
13. UTILIZATION
Dispose of the device and packaging in accordance with the procedure established by the standards and regulations in the
eld of production and consumption waste management. Paper, plastic and metal waste must be sorted according to the
standards for separate waste collection approved in your region.
Dispose of the electronic angle nder separately from the sharpening device. Do not dispose of electrical devices together
with household waste, contact a hazardous waste collection point. Contact your local municipal recycling authorities or
certied recycling companies that specialize in the disposal of such devices in your area.
To Next Page
Loading...
