3. SAFETY REQUIREMENTS
◇ Be sure to read this User Manual before using the device. The device should not be used by persons who are not
familiar with this manual.
◇ This device is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they are supervised or instructed by a person responsible
for their safety.
◇ Minors must be supervised to ensure that they do not play with the Device.
◇ Before you start working with the Device, prepare your workplace. There should be no foreign objects in the
working area of the device. The working area must be illuminated.
◇ Make sure that the Device is stable on the table. If using a clamp, make sure that it is well tightened and that the
housing is securely clamped to the work surface.
◇ To prevent cuts, do not touch the cutting edge of the blade with your hands. It is recommended that you wear cut-
resistant gloves when handling the machine.
◇ When sharpening, beware of accidental triggering of the rotating mechanism if the clamping force is weak or the
abrasive holder is pressed too hard. Adjust the force correctly (gure on page).
◇ Do not leave unattended the device prepared for operation, as well as an open, uncovered knife blade in the access
area of children and animals.
To Next Page
Loading...
