ATTENTION!
Before using the Device, read this User Manual carefully. Improper use of the Device may cause it to break down.
Strict adherence to the rules in this manual will prevent personal injury and damage to the Product.
The Manufacturer is not liable for damages caused by improper use of the Device.
1. PURPOSE
The TSPROF K03 Pro Sharpening Device (hereinafter referred to as the Device) is a universal
sharpening tool designed for double-sided sharpening of knives without removing the blade from the
clamps for sharpening the back side of the blade.
2. TECHNICAL CHARACTERISTICS
Characteristics
Spine thickness of knives, mm
Blade length of the knife, mm
Blade width of the knife, mm
Abrasives length, mm
Abrasive thickness, mm
Dimensions of the device in operating position,
without abrasive holder LxWxH, mm
Weight of the device with abrasive holder, g
Maximum sharpening angle (per side)
Minimum sharpening angle (per side)
Value
up to 7
30 – 400
from 13
up to 210
3 to 16 (with blank)
500 х 200 х 260
2 600
39°
8°
* depending on the type of clamp used
WATCH THE
VIDEO TUTORIAL:
To Next Page
Loading...
