V1.0
The symbols on the microinverter are listed below and illustrated in detail.
This device is directly connected to the public grid, thus all work to the
inverter shall only be carried out by qualified personnel.
The components inside the inverter will release a lot of heat during
operation. Do not touch metal plate housing during operation.
Please read the installation manual first before installation, operation, and
maintenance.
This device SHALL NOT be disposed of in residential waste.
This device fulfills the requirements of the Radio Equipment Directive.
This device complies with the RoHS Directive.
There is a risk of electric shock during energy conversion. Before releasing
the remaining voltage, do not perform any operations and do not enter
within 25 centimeters of the surrounding area.
Before opening the lid, it is necessary to disconnect the device and let it sit
for at least 5 minutes.
This device fulfills the requirements of INMETRO.
This device fulfills the requirements of ANATEL, the certificate number is
14715-23-02060.
System Introduction
The microinverter is used in grid-tied applications, comprised of two key elements:
Microinverter.
TSUN monitoring system.
The microinverter converts the DC electricity generated by solar panels into AC electricity
which is in accordance with the requirements of the public grid and sends the AC into the grid,
To Next Page
Loading...
