Why is my Tsun Measuring Instruments showing AC Overvoltage?
The AC Overvoltage error on your Tsun Measuring Instruments might be due to abnormal power grid fluctuations. If this is the case, the system should automatically recover after a while. If the issue persists, examine the protection settings.
Why does my Tsun TSOL-MS2000 show PV1VoltLow_Fault?
The 'PV1VoltLow_Fault' warning on your Tsun Inverter often appears in the morning or at dusk. If this warning appears during the daytime, check the connection of the PV module.
How to fix Tsun TSOL-MS2000 PV1VoltOver_Fault?
To address a 'PV1VoltOver_Fault' on your Tsun Inverter, check the voltage of the PV module. Ensure that the voltage is below the maximum DC input voltage of the microinverter.
What to do if Tsun TSOL-MS2000 shows Fault 01 - 08?
If your Tsun Inverter displays a 'Fault 01 - 08' error, disconnect the AC power to restart the microinverter.
What to do if my Tsun TSOL-MS2000 Inverter displays a GFDI_Fault?
If your Tsun Inverter is showing a 'GFDI_Fault', this indicates an internal fault. Disconnect the AC power to restart the microinverter.
Why does my Tsun TSOL-MS2000 show OverTemp?
If your Tsun Inverter is showing an 'OverTemp' warning, it might not have good heat dissipation. Review the installation to ensure proper ventilation around the microinverter.
What to do if my Tsun TSOL-MS2000 shows 'No Utility'?
If your Tsun Inverter displays a 'No Utility' fault, it means the AC power grid is disconnected. Check the AC power grid to ensure it is functioning correctly. If the fault persists, it may indicate a more complex issue.
What to do if my Tsun Inverter has no utility?
If your Tsun Inverter shows a 'No Utility' fault, the AC power grid might be disconnected. Check the AC power grid to ensure it is working. If the problem persists, it could indicate a more serious issue.
What to do if Tsun TSOL-MS2000 displays PV1VoltOver_Fault?
If your Tsun Inverter displays PV1VoltOver_Fault, check the voltage of the PV module to ensure it's below the maximum DC input voltage of the micro inverter. If the fault persists, contact Tsun service.
What to do if Tsun TSOL-MS2000 shows PV1VoltLow_Fault?
If your Tsun Inverter displays PV1VoltLow_Fault, especially in the morning or at dusk, it is usually normal. However, if this warning appears during the daytime, check the connection of the PV module. If the fault persists, contact Tsun service.
Defines the intended professional users for this manual.
Mandatory adherence to handling and safety instructions during installation and operation.
Explains the safety symbols used in the document.
Explains the role of the microinverter in converting DC to AC power.
Describes the monitoring system component that works with the microinverter.
Illustrates the physical components and ports of various microinverter models.
Verify package integrity and installation environment suitability before proceeding.
Provides fault codes and corresponding troubleshooting steps for common issues.
Guidelines for regular checks, cleaning, and firmware updates.
To Next Page
General
