What to do if Tsun TSOL-MS2000 shows PV1CurrOver_Fault?
If your Tsun Inverter displays PV1CurrOver_Fault, disconnect the AC power to restart the micro inverter. If the fault appears continuously, please contact the TSUN service.
How to fix OverTemp on Tsun TSOL-MS2000 Inverter?
If your Tsun Inverter is showing an OverTemp error, check the installation to ensure it has good heat dissipation. If the fault continues, contact Tsun service.
What to do if my Tsun Inverter displays GFDI_Fault?
If your Tsun Inverter displays a GFDI_Fault, disconnect the AC power to restart the micro inverter. This fault indicates an internal issue. If the problem persists, contact Tsun service.
What to do if my Tsun TSOL-MS2000 Inverter displays Fault 01 - 08?
If your Tsun Inverter shows Fault 01 - 08, disconnect the AC power to restart the micro inverter. If the fault appears continuously, please contact the TSUN service.
Why does my Tsun TSOL-MS2000 Inverter show GridVoltOverRating?
The GridVoltOverRating fault on your Tsun Inverter indicates an abnormality in the AC power grid. This issue should resolve itself when the AC power grid returns to normal. However, if the fault continues, contact Tsun service.
How to fix Tsun TSOL-MS2000 'PV1VoltOver_Fault'?
Check the voltage of the PV module and ensure that the voltage is below the maximum DC input voltage of the Tsun microinverter.
What to do if Tsun TSOL-MS2000 displays 'Fault 01 - 08'?
If your Tsun Inverter displays a 'Fault 01 - 08', disconnect the AC power to restart the microinverter.
Why does my Tsun Inverter show 'PV1VoltLow_Fault'?
If your Tsun Inverter is showing 'PV1VoltLow_Fault' during the daytime, check the connection of the PV module. This warning is normal in the morning or at dusk and will disappear automatically.
What to do if Tsun TSOL-MS2000 shows 'PV1CurrOver_Fault'?
If your Tsun Inverter displays a 'PV1CurrOver_Fault,' disconnect the AC power to restart the microinverter.
How to fix Tsun TSOL-MS2000 Inverter 'OverTemp' fault?
If your Tsun Inverter displays an 'OverTemp' fault, first check the installation to ensure it has good heat dissipation.
Defines the intended professional users for this manual.
Mandatory adherence to handling and safety instructions during installation and operation.
Explains the safety symbols used in the document.
Explains the role of the microinverter in converting DC to AC power.
Describes the monitoring system component that works with the microinverter.
Illustrates the physical components and ports of various microinverter models.
Verify package integrity and installation environment suitability before proceeding.
Provides fault codes and corresponding troubleshooting steps for common issues.
Guidelines for regular checks, cleaning, and firmware updates.
To Next Page
General
