TUNGSTEN T series ATV winch
5
winching operation.
• Never “jog” rope under load. Shock loads can momentarily exceed capacity of rope and
winch.
• Never use winch to secure a load during transport.
• Never submerge winch in water.
• Always store the remote control in a protected, clean, dry area.
• Always double line or pick distant anchor point when rigging. This maximizes pulling power
and avoids overloading the winch.
To prevent accidental activation of the winch and serious injury, complete the winch
installation and attach the hook before installing the wiring.
Safety
When installing your ATV winch system, read and follow all mounting and safety instructions.
Always use caution when working with electricity and remember to verify that no exposed
electrical connections exist before energizing your winch circuit. For specifications and
performance data, refer to the specification sheet supplied with your winch.
2. Winch mounting & Assembly
Figure 1: To install the
complete kit, you will
need to mount the
winch, contactor
handlebar mounted
Mini-rocker switch and
remote socket.
To Next Page
Loading...
