Need help?Do you have a question about the TurboChef ENCORE 2 and is the answer not in the manual?
General| Model | ENCORE 2 |
|---|---|
| Category | Oven |
| Exterior Finish | Stainless Steel |
| Control Type | Digital |
| Control Interface | Touchscreen |
| Cavity Type | Single |
| Electrical Requirements | 208-240V, 60 Hz |
| Temperature Range | 200°F to 500°F |
| Warranty | 1 Year Limited |
| Power | 3.6 kW |
| Power Consumption | 3.6 kW |
General guidelines for safe operation and handling of the appliance.
Precautions to prevent fires during oven operation and storage.
Proper grounding procedures to prevent electric shock.
Safety measures to avoid microwave exposure and minimize RF interference.
How the oven works and its physical specifications.
Oven approvals, materials, and power requirements.
Steps for installation, including unpacking and safety warnings.
Guidelines for placement near heat and securing the oven.
Details on ChefComm, Oven Connect, Voltage Selection, and Ventilation.
Step-by-step instructions for routine cleaning of oven components.
Recommended cleaning tasks to be performed every three months.
Explanation of each button and the display on the control panel.
Steps for operating the oven and cooking food using its features.
Viewing oven status, serial number, versions, and logs.
Accessing and using the mode for testing oven components.
Settings for Cook More, Edit Mode, Load Menu, Network, Auto On/Off, Demo, Light Ring.
Setting oven time, auto functions, and managing menu files.
Updating firmware, adjusting sound, viewing temp, and resetting the oven.
Adjusting set temperatures, baking stone use, and offsets.
Modifying food groups, items, and cook settings.
Accessing Test Mode and understanding status indicators.
Testing magnetron, blower motor, and heaters.
Using modes for monitoring, initial testing, and specific tests.
Testing voltage, erasing settings, and changing temperature units.
Details on blower motor, heaters, and thermostats.
Procedures for door adjustment and interlock switch function.
Information on capacitors, transformers, magnetrons, and waveguides.
Details on the control board, display, keypad, and interface elements.
Information on fans, filters, fuses, power supply, and relays.
Details on the catalytic converter, air filter, and vent catalyst.
Introduction to error codes and troubleshooting methods.
Flowcharts for diagnosing specific fault codes (F1-F9).
Tips for issues not related to specific error codes.
Diagrams showing the arrangement and function of various relays.
Overall wiring diagrams for the Encore oven and microwave circuits.
Diagrams for low voltage, heater, fan, and main power connections.
Diagrams showing the arrangement and function of Encore 2 relays.
Overall wiring diagrams for Encore 2 and microwave circuits.
Diagrams for Encore 2 low voltage, heater, fan, and power connections.
Guide to illustrations and part numbers for component replacement.
Illustrations and part numbers for external and impingement components.
Illustrations and part numbers for microwave system and door components.
Illustrations and part numbers for control and power components.
Guide to Encore 2 illustrations and part numbers.
Illustrations and part numbers for Encore 2 external and impingement components.
Illustrations and part numbers for Encore 2 microwave and door components.
Illustrations and part numbers for Encore 2 control and power components.
To Next Page
