TurboChef ENCORE 2

5150
ENCORE OVEN SCHEMATIC AND WIRE HARNESSES
ENCORE OVEN SCHEMATIC AND WIRE HARNESSES
ENC-1208-1: Harness, Wiring, HV, MW Circuit 1
DANGER: Before removing any oven part, be sure the oven has completed “cooling down” (see
“Step 9” on page 11) and is removed from the power source.
ENC-1208-2: Harness, Wiring, HV, MW Circuit 2
DANGER: Before removing any oven part, be sure the oven has completed “cooling down” (see
“Step 9” on page 11) and is removed from the power source.