TurboChef ENCORE 2

6766
ENCORE 2 OVEN SCHEMATIC AND WIRE HARNESSES
ENCORE 2 OVEN SCHEMATIC AND WIRE HARNESSES
ENC-1403: Harness, Wiring, Low Voltage
DANGER: Before removing any oven part, be sure the oven has completed “cooling down” (see
“Step 9” on page 11) and is removed from the power source.
ENC-1402: Harness, Wiring, HV, MW Circuits 1 and 2
DANGER: Before removing any oven part, be sure the oven has completed “cooling down” (see
“Step 9” on page 11) and is removed from the power source.