2 Captive bolt stunner device
Foreword
Scope of supply
Pleaseensure that you readthroughthese operatinginstructions
(dated:06/2023) before rstuse!
Please read throughthesafety instructions carefully toensuresafe
andcorrect use.Always keepthese operatinginstructions safely
with the captive boltstunner device
Thecaptive boltstunner may be passed onto other trainedpersons
only withthese operatinginstructions.
You willndseveral translations of thisinstructionmanualas well
as furtherinformationon our homepage www.turbocut.de.
You will nd several translations of this ma-
nual instruction as well as further informati-
on on our homepage www.turbocut.de
Please check the delivery for completeness and damage. Should parts be
missing or defective, please contact your supplier immediately.
For further information, please scan this QR code:
Number Designation
1 x Blitz captive bolt stunner (packed in oil paper)*
1 x operating instructions
1 x cleaning set (cleaning rod, large and small brush)
Manufacturer:
turbocut Jopp GmbH
D-97616 Bad Neustadt an der Saale
Contact :
turbocut Jopp GmbH
Donsenhaug 4
D-97616 Bad Neustadt an der Saale
Telefon:+49 (0) 9771 / 9105-363
Fax: +49 (0) 9771 / 9105-368
E-Mail: info@turbocut.de
Internet: www.turbocut.de
*) optionally available in a case including cartridges and cleaning oil on request
To Next Page
Loading...
