5
Captive bolt stunner device
1.3 Identication details
2.1 Basic safety information/ofcial safety
regulations
2. Safety instructions
1.4 Transferring the information
Location of the identication details on the device:
Copy the following information into your operating instructions and always
quote this when making inquiries or when submitting for repeat testing:
The relevant national and international regulations should be observed.
Failure to comply with the regulations or legal provisions and accident pre-
vention regulations can result in personal injuries, injuries to others and
property damage. Observe the safety instructions in these operating in-
structions at all times.
For the operation of the Blitz captive bolt stunner, the respective valid ver-
sion of the accident prevention regulation "Working with shooting devices"
(DGUV regulation 56) from the employers' mutual insurance association
must be precisely observed and taken into account.
The device and the blank cartridges must be stored safely, protected from
unauthorized use.
model series Year of production lfd. Number
Headpiece Production year, serial number
Sleeve
Manufacturer, model series, production year,
serial number, product name, ammunition type
To Next Page
Loading...
