Do you have a question about the Turbosmart e-Boost-40 and is the answer not in the manual?
Type | Electronic Boost Controller |
---|---|
Boost Control | Yes |
Boost Pressure Range | 0-40 PSI |
Operating Voltage | 12V |
Compatibility | Universal |
Display | LCD Screen |
Warranty | 1 Year |
Lists all components supplied with the e-Boost unit for installation and their intended use.
Details how and where to physically mount the e-Boost unit in a vehicle, including gauge cup options.
Provides instructions for installing the e-Boost solenoid, including diagrams for external and internal wastegates.
Explains the electrical wiring connections required for the e-Boost unit, referencing a wiring diagram.
Describes the default operating mode and how to view and change boost set points.
Explains how to view boost set point values and navigate between them in Live Mode.
Details how to access and adjust boost parameter settings using the device's buttons.
Explains how to access and adjust user-defined parameters for the e-Boost.
Describes the procedure to safely turn off the e-Boost unit, reverting to standard boost.
Explains the critical Over Boost Shutdown safety feature and its proper setting procedure.
Details how to change the display units for boost pressure between bar, psi, or kpa.
Explains how to configure the e-Boost bar graph display and its scale segments.
Guides on setting boost pressure values for SP1, SP2, and SP3, with a reference table.
Explains the sensitivity adjustment and its effect on boost control, including live tuning.
Describes how to set gate pressure to optimize wastegate opening and boost response.
Details the function and setup of the auxiliary output for controlling external devices based on boost pressure.
Explains the audible alarm function and how to program its trigger pressure for warnings.
Describes how to use external triggers (earthing wires) to switch between boost set points.
Explains the Peak Hold function to record and view maximum boost pressure achieved.