user manual
NuQ series
NuQ manual
page 10
NuQ-8DP
The NuQ-8DP is a compact, trapezoidal, digitally self-
powered networkable two-way loudspeaker enclosure
incorporating integrated Class D amplifier and control
electronics module. It combines an 8” LF driver with a 1”
HF compression driver on a rotatable 100º x 60º high
frequency waveguide. Its symmetrical cabinet shape
allows it to be used as a low profile monitor wedge. The
amplifier module provides input and link XLRs, RJ45
network connectors, low frequency contour, power
switch and status LED’s. The power supply is auto-
sensing, enabling connection to mains supplies ranging
from 100 volts to 240 volts AC.
The cabinet is fitted with a pole mount socket which
enables it to be used with poles and speaker stands.
NuQ-10DP
The NuQ-10DP is a trapezoidal, digitally
self-powered networkable two-way
loudspeaker enclosure incorporating an
integrated Class D amplifier and control
electronics module. It combines a 10” LF
driver with a 1” HF compression driver on a
rotatable 100º x 60º high frequency
waveguide. Its symmetrical cabinet shape
allows it to be used as a low profile monitor
wedge. The amplifier module provides
input and link XLRs, RJ45 network
connectors, low frequency contour, power
switch and status LED’s. The power supply
is auto-sensing, enabling connection to
mains supplies ranging from 100 volts to
240 volts AC.
The cabinet is fitted with a pole mount socket which enables it to be used with poles and
speaker stands.
To Next Page
Loading...
Need help?
General
