user manual
NuQ series
NuQ manual
page 18
Networking Capability
NuQ series systems—these can be either passive or active loudspeakers operating with
LMS series digital loudspeaker management systems, or self-powered loudspeakers, or a
combination of both—may be connected together over a BvNet network, enabling real-
time control and monitoring of multiple operating parameters from a central location
with a PC running TurboDrive™ software, or even remotely via a VPN (virtual private
network).
LMS-D2X series controllers are equipped with network cards as standard and are pre-
configured with factory programs for all NuQ series models. Self-powered NuQ series
loudspeakers are supplied with built-in network functionality.
Computer system requirements
Minimum system requirements are as follows:
• PC with Pentium processor
• Windows NT, 2000, XP or Vista
• CD ROM or internet access
• RS232 or USB port
The TurboDrive™ software is available from the CD supplied with your product, or as a
download from our website at www.turbosound.com
. Always check the website for the
latest version of the software.
Hardware requirements
In addition to a desktop PC or laptop as described above, the following equipment is
required in order to assemble a NuQ system network:
• Linea Research USB & RS232 Interface
• Linea Research Accessory Power Supply (optional)
• CAT5 type network cables
• Self-powered NuQ loudspeaker(s) OR
• NuQ loudspeaker(s) AND LMS-D24 or LMS-D26 loudspeaker management
system(s)
To Next Page
Loading...
Need help?
General
