Turbosound NuQ SERIES User Manual

user manual
NuQ series
NuQ manual
page 20
4. Using USB
Connect your computer to the BvNet interface using a USB Type A to USB Type B
cable. External power is not required when using USB.
5. Connect network devices in a simple daisy-chain fashion with CAT5 type cables
in the order you want them to appear in the devices window.
6. Launch the TurboDrive™ software
On the first launch, the application will prompt for an authorisation code. The
code is PJLUWZ
7. Select the COM port from Network > Com Port
8. Click the Online toolbar button
9. Click on one of the devices that appear in the tree view to Launch the Panel
RS-232
USB
BVNET INTERFACE
CONTROLLER
CONTROLLE
R
USB
IN LINK
IN LINK
IN LINK

Turbosound NuQ SERIES Specifications

General

Brand	Turbosound
Model	NuQ SERIES
Category	Speakers
Language	English